Signed in as:
filler@godaddy.com
Signed in as:
filler@godaddy.com
The FlyCam System is a cutting-edge solution designed exclusively for professional filmmakers working with handheld equipment. Equipped with the innovative "Easyrig" system, FlyCam can support medium to heavy weight cameras, providing unparalleled versatility and stability to your productions.
With FlyCam, you can capture smooth and steady shots for extended periods of time, even during fast-paced and dynamic filming scenarios. The breathable fabric and ventilated soft padding ensure maximum comfort and ease of use, allowing you to concentrate on your craft without distractions.
INCLUDED IN KIT
Available Accessory: FLOWCINE 2-Axis Puppeteer With Carabiner & Handle
The 2-Axis Puppeteer from Flowcine is the perfect solution for professional filmmakers who require smooth, vibration-free operation from their handheld motorized gimbals and camera setups alone. This innovative system eliminates unwanted tilt and roll axis motion caused by the EasyRig cord, resulting in flawless footage when walking or running. The 2-Axis Puppeteer also allows you to easily tilt your motorized gimbal when shooting in follow or majestic modes without having to fight against the tension of the EasyRig cord. Compatible with the Freefly MoVI, DJI Ronin, and similar models.
The Powermatic Scissor telescopic camera crane is a powerful tool and allows you to position the camera extending up to 5m and retracting smoothly. Made from lightweight high-grade aluminium, this crane can support 3-axis camera gimbals up to 15kg full payload.
*must support with minimum 40kg of shot bags when built.
Effortless Operation:
Simplified Transport:
Gravity Stand:
Anchor Dolly:
Transmit uncompressed 1080p SDI or HDMI video wirelessly over 1000 feet line-of-sight with the Teradek Bolt 1000 SDI/HDMI Wireless TX & RX Kit. Included in this set are a Teradek Bolt 1000 transmitter and receiver, which are equipped with both 3G-SDI and HDMI ports. The TX can pair with and multicast to up to four receivers (additional receivers not included but compatible with our 703 and 500LT). When transmitting uncompressed video, latencies of less than one millisecond can be achieved if no other video processing is necessary.
Transmitting across 5 GHz frequency, the TX/RX pair utilises Dynamic Frequency Selection (DFS) to find a clean signal between both units. This is desirable when working in areas with crowded frequencies. Both TX and RX are equipped with HDMI and SDI ports, which allow for cross conversion from HDMI to SDI and SDI to HDMI during transmission. The transmitter also features a loop-through SDI output. The USB GRAB engine streams the uncompressed video straight out of the receiver and into a PC for immediate recording.
Transmit uncompressed 1080p SDI or HDMI video wirelessly over 500 feet line-of-sight with the Teradek Bolt 500XT SDI/HDMI Wireless TX & RX Kit. Included in this set are a Teradek Bolt 500XT transmitter and receiver with installed V-Mount, which are equipped with both 3G-SDI and HDMI ports. The TX can pair with and multicast to up to four receivers (additional receivers not included but compatible with our 703 and 500LT). When transmitting uncompressed video, latencies of less than one millisecond can be achieved if no other video processing is necessary.
Transmitting across 5 GHz frequency, the TX/RX pair utilises Dynamic Frequency Selection (DFS) to find a clean signal between both units. This is desirable when working in areas with crowded frequencies. Both TX and RX are equipped with HDMI and SDI ports, which allow for cross conversion from HDMI to SDI and SDI to HDMI during transmission. The transmitter also features a loop-through SDI output. The USB GRAB engine streams the uncompressed video straight out of the receiver and into a PC for immediate recording.
Transmit uncompressed 1080p SDI or HDMI video wirelessly over 500 feet line-of-sight with the Teradek Bolt 500XT SDI/HDMI Wireless TX & RX Kit. Included in this set are a Teradek Bolt 500XT transmitter and receiver, which are equipped with both 3G-SDI and HDMI ports. The TX can pair with and multicast to up to four receivers (additional receivers not included but compatible with our 703 and 500LT). When transmitting uncompressed video, latencies of less than one millisecond can be achieved if no other video processing is necessary.
Transmitting across 5 GHz frequency, the TX/RX pair utilises Dynamic Frequency Selection (DFS) to find a clean signal between both units. This is desirable when working in areas with crowded frequencies. Both TX and RX are equipped with HDMI and SDI ports, which allow for cross conversion from HDMI to SDI and SDI to HDMI during transmission. The transmitter also features a loop-through SDI output. The USB GRAB engine streams the uncompressed video straight out of the receiver and into a PC for immediate recording.
Combining a wireless video receiver and high-quality HD monitor, the SmallHD 703 Bolt 7" Wireless Monitor is an all-in-one director's monitor solution. With built in Teradek technology from Teradek, the 703 Bolt can receive uncompressed HD wireless signals from Bolt 500(XT), 1000, or 3000 transmitters up to 300' away with no perceptible latency. With this feature, anyone can walk around the set while monitoring a camera feed, perfect for directors and camera assistants. Furthermore, despite the presence of a wireless receiver, the 703 Bolt maintains a slim profile similar to on-camera monitors.
A unibody aluminium exterior keeps the monitor durable yet lightweight, while also acting as a heatsink for the internal electronics. The LCD panel itself is protected by a layer of optically-bonded Gorilla Glass, notable for its transparency and toughness. The optical bonding process ensures that blacks are not washed out and reduces the harshness of reflections. Also this unit is equipped with a v-mount adapter.
On the sides of the display is the SDI I/O. Having dual SDI ports allows for A/B viewing of two different SDI signals, or the secondary port can be assigned as an output for sending an SDI signal downstream to another monitor, switcher, or wireless accessory. All the functionality of the monitor is available via the PageBuilder OS, which provides advanced functionality with a simple and efficient graphical user interface.
With the Teradek Bolt LT 500 3G-SDI Wireless Video Receiver you can receive visually lossless 3G-video signals from a Bolt 500 (XT) transmitter with zero latency. The receiver unit itself can be secured via built-in 1/4"-20 or M3 threaded holes.
Power can be provided using the integrated 2-pin lemo connector.
The receivers has built-in AES 128 encryption that protects your video from prying eyes, while noise rejection helps keep your video clean even when working around 2.4 and 5.8 GHz signals.
This unit features 3G-SDI loop through and SDI ancillary data support: metadata, timecode, and start/stop flags from certain camera manufacturers.
This receiver features a smaller and lighter chassis design than other Bolt 500 units , making is the perfect companion for on set monitoring.
Features:
Copyright © 2023 TURNKEY HIRE, Video Equipment - All Rights Reserved.
Powered by Moco Robo
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.